Screen Enclosure Questions, Answered for Sarasota Homeowners
Answers to the questions we hear most from homeowners in Sarasota, Manatee, and Charlotte counties about pool cage and screen enclosure work. Don't see what you're looking for? Call the office or send us a message.
FAQ
Common Questions
Rescreening replaces the screen mesh in an existing pool cage or enclosure. The old screen and the spline that holds it in the frame's channel come out, new mesh is cut to size, and a fresh bead of spline rolls it back in and holds it taut. The aluminum frame underneath isn't replaced unless it's also damaged, which is a separate repair job.
The usual signs are torn or sagging panels, mesh that's gone brittle enough to crack in a spiderweb pattern when you touch it, and screen pulling loose from the spline channel around the frame. Discoloration alone doesn't always mean the screen has failed structurally, but it's often the first thing homeowners notice.
Screen comes in a few general categories: standard fiberglass mesh, a tighter "no-see-um" weave for smaller bugs, and heavier patio or pet screen. The right option depends on your enclosure and what's bothering you most — ask us and we'll go over what makes sense for your property.
There's no fixed lifespan. Florida sun, salt air for homes closer to the coast, and everyday wear all affect how long screen holds up, and it varies from property to property. If you're not sure whether your screen has reached the end of its life, we're glad to take a look and let you know.
Rescreening only replaces the mesh inside a frame that's still structurally sound. Repair work addresses the aluminum frame itself — resetting a shifted panel, replacing a bent beam or corner key, or re-securing loose fasteners. Screen often gets replaced as part of a repair job too, but the frame is the actual point of the work.
Screenmasters of Sarasota serves Sarasota, Manatee, and Charlotte counties, including Sarasota, Bradenton, Venice, and Siesta Key among the communities we cover. If your town isn't listed on our service area pages, call the office — there's a good chance we still cover it.
Yes. Estimates are free and come with no obligation to move forward.
Yes. Screenmasters of Sarasota holds Florida State License #RX0066638.
Clear access to the pool cage, lanai, or patio area you'd like looked at, and make a note of any specific spots where you've noticed torn screen, loose panels, or other damage. Having your questions ready helps make the most of the visit, but there's nothing special you need to do beforehand.
Wind-driven rain, flying debris, and sustained high winds are the main things storm season puts on a screen enclosure. It's worth having your enclosure looked at before storm season ramps up and again afterward — panels can pop loose and mesh can tear from flying debris even without one dramatic event causing it.
Permit and engineering requirements for new construction vary by county and by the size and design of the structure. Ask us what applies to your property and we'll walk you through what's needed.
Screenmasters of Sarasota is family owned and operated, started in 1995 by Leon and Matt Derocher after years of working in Sarasota and Manatee counties; Daniel Derocher joined the business later. Together the family brings over 70 years of combined experience in the aluminum industry to every job.
Still Have a Question?
Call the office or request a free, no-obligation estimate — either way, you'll be talking to the same family business that's served this area since 1995.